by Imperial Systems | Aug 29, 2017 | Woodworking
Traditionally, the woodworking industry has relied on cyclones and baghouses. The cyclone is the workhorse for removing larger particles with a minimum of hassle, but it lets smaller particles through. The baghouse, the traditional workhorse of the wood industry, has been the go-to dust collector for this application for a long time. However, this is changing as cartridge collectors are making an impact. The CMAXX for woodworking and wood dust is certainly proving itself in the field.
Cartridge Collector Advantages for Wood Dust
A cartridge collector like the CMAXX offers many advantages over a baghouse. The first one is obviously the size. Because cartridge filters are pleated, you can fit the same amount of surface area into a relatively tiny collector.
The second advantage of CMAXX for woodworking is the ease of changing filters. A baghouse full of old sawdust is not anyone’s idea of fun, and it may even be considered an OSHA confined space. But with a CMAXX cartridge collector, lift rails easily slide the filters out. So, there’s no getting inside the collector and no climbing around in a mess of wood dust. Plus, there’s no changing dozens or hundreds of bags.
A third advantage to using a CMAXX for woodworking is that it can capture very small particles very efficiently. With DeltaMAXX nanofiber filters with a MERV 15 rating, your shop will be cleaner than ever before, without the fine dust that used to get through.
A fourth advantage is the ease of customizing a CMAXX for your woodworking application. Many different types of fire and explosion prevention are available, improving safety and protecting buildings from damage. Also, for special applications, options like overbags can help. They make cartridge filters even better at handling the difficult material a woodworking application can create.
CMAXX Outperforms the Baghouse
We have worked overtime with many woodworking companies, and they usually want baghouses. However, recently many customers have checked out the CMAXX for wood dust. They looked at how it works, and the quality, and decided to give it a try.
What they’ve found is that for some types of woodworking applications, the CMAXX outperforms a baghouse. It has a much smaller footprint and is much less messy and time-consuming. Many of our woodworking customers are Amish and strongly value efficiency, good quality, and things that just work well. They have chosen CMAXX for woodworking because it meets their high standards.
Consider a CMAXX designed by our systems specialists for your woodworking application. It can handle everything from mixed large and small particulate to extremely fine wood dust. It can save you time and space, protect you from the risk of combustion, and make your life easier. Allow one of our specialists to show you how a CMAXX for woodworking is right for our shop. It can be an amazing value in quality, space and time savings, and efficiency.
Read more
by Imperial Systems | Apr 12, 2017 | Woodworking
The baghouse is a workhorse of the dust collection industry, handling everything from high temperatures to rough, abrasive dust. The Imperial Systems engineers are experts in designing baghouse systems specifically for woodworking and paper recycling applications. The BRF baghouse system has certainly proven itself in these industries, as these case studies show.
INDUSTRY: Custom Cabinets
PROBLEM: Wrong Collector for the Job
This woodworking company had installed a dust collection system, but within just a week their filters were already blinding off. Consequently, they were spending a lot of money on over-bags, constant compressed air pulsing, and filter changes. So, they needed to make a change.
Not all collectors are suitable for all applications. The Imperial Systems team examined the problems the company was having. They decided that a BRF baghouse would be the right solution. The problem was very fibrous wood dust. The original collector was a cartridge system, and cartridges usually aren’t the best solution for fibrous or stringy material.
Each BRF baghouse system is designed for each customer’s needs. We applied our knowledge of woodworking applications to solve this customer’s problem.
The BRF is handling this company’s fibrous wood dust with no problems. As a result, it has cut down on compressed air use, filter changes, and production downtime. Imperial Systems makes both cartridge collectors and baghouses. Therefore, we’re able to determine which one will work better for a particular application.
INDUSTRY: Paper Recycling
PROBLEM: NFPA Compliance, Dust Accumulation
This paper recycling company runs 24 hours a day, 365 days a year. The dust load is heavy and constant. The wood dust extraction systems they had in place were not up to the job: several inches of dust had accumulated on surfaces around the facility, creating a very severe fire hazard. Also, because there was so much dust in the air, the employees had to wear dust masks. Further, they were dealing with respiratory infections and eye irritation.
Employee health was at risk and a combustible dust accident was waiting to happen. So, the company came to Imperial Systems to design a solution to handle their very heavy dust load.
From consultation and drawings to engineering and fabrication, the company had constant contact with the Imperial Systems team. We made sure everything would work exactly as they needed it to. The project was completed in March of 2014, and the company had great praise for the design and installation teams.
Since installing the BRF baghouse system for paper dust, the company is now fully NFPA compliant and dust accumulation is no longer a problem. The facility is clean and the health problems the employees had been dealing with are resolved.
Not just any system can handle a heavy dust load with round-the-clock shifts. Imperial Systems has experience in the paper recycling industry to design a system that will handle this kind of abuse for many years to come.
Read more
