MERV RATINGS AND DUST SIZE

May 4, 2017

 

For any air filter, it’s important to know how efficient it is at filtering out dust and particles from the air. The problem is that not all dust is the same size. This will give you some idea of the different dust size that a dust or fume filter might have to deal with:

Dust size versus the MERV rating of a DeltaMAXX cartridge dust filter

 

HOW BIG IS A MICRON?

A micron (also called a micrometer) is one millionth of a meter. As shown above, a human hair is about 80-100 microns. A sheet of paper is between 70 and 180 microns thick. Most fibers for use in making clothes are somewhere between 10 and 50 microns.

Here are some other things measured in microns:

BACTERIA – 1 to 10 microns

RED BLOOD CELL – 7 microns

MIST/FOG DROPLET – 10 microns

WAVELENGTH OF INFRARED RADIATION – 0.70 to 300 microns

 

WHAT IS A MERV RATING?

MERV stands for “minimum efficiency reporting value”. It is determined by testing a filter to find out what dust size it can filter. What’s important isn’t just the dust size, though. It’s also the efficiency: how much of that dust a filter can capture. There are three general categories of dust size used by ANSI/ASHRAE: E1, which is particles from 0.30 to 1 micron, E2, from 1 to 3 microns, and E3, from 3 to 10 microns.

The MERV rating tells you what percent of particles in that size range the filter will capture. Here are some examples:

MERV 6 – between 35 and 50% efficient for dust size bigger than 3 microns

MERV 10 – between 50 and 65% for dust size from 1 to 3 microns

MERV 15 – between 85 and 95% for dust size smaller than 1 micron

 

WHY IS THIS IMPORTANT?

Your filter needs to have the right MERV rating for your dust size. For an industrial dust collector, this is especially important for meeting OSHA regulations, keeping your facility clean, and keeping the collector working efficiently.

Dust size can help determine what type of dust collector and filter you need.Metal fume particles and other industrial dust can be smaller than 1 micron. If you look at the chart above, you’ll see just how small that is. It’s much smaller than many other things you can’t even see.

Metal fume and smoke particles can also be dangerous for your health, so it’s important that a filter catches as much of that dust as possible.

DeltaMAXX nanofiber filters have a MERV rating of 15. This means that they will capture between 85 and 95% of particles in the 0.30 to 1 micron range.

If your dust is very hazardous, like hexavalent chromium, you may need to add a HEPA filter. These don’t have a MERV rating: their rating is usually between 99.95% and 99.99%.

So why not use HEPA filters for everything just to make sure? First, they’re expensive. Second, catching that dust size means that the filters have to slow down the air a lot and have a lot of resistance. This isn’t necessarily what you want happening in an industrial air filtration system. For most industrial applications, MERV 15 is efficient enough.